T5/T6/T7/T8
SLANT-BED PERCISION CNC LATHE
High Precision Spindle
Themachinetool adopts Japanese ultra-high precision spindle bearings, with ahigh rigidity combination design to ensure high rigidity and long- lasting accuracy of the spindle. The spindle runout is less than 3μm.
High Efficiency Machining
Max. Speed of spindle is 5500rev/min, Rapid traverse speed of the X and Y axes canreach up to24 and 28m/min. Auto parts feeder can be equipped to fulfil fast and efficient automation production.
Accurate Feeding
Each feeding axis is driven by servo motors through Japan THK precision ball screws. Machining accuracy is ensured and longtime accuracy is remained. Repeat ability is less than<±1.5μm.
High Precision Turret
High precision turret, more tool station, tisfast, steady, accurate to change tool, and save process time.
Hydraulic Turret
Hydraulic tailstock, the guide wayof tailstock can be dismantled, flexible configuration, it greatly increae Shaft parts Machining precision and Efficiency, and save process time.
Extra Heavy Cutting
Hydraulic rotary cylinder with high speed and high accuracycombined with rigidand precise power chuckincrease greatly heavy cutting and tough metal cutting capacity.
Control System
Driven by FANUC control systems that enable the lathes with great stability. It can also be equipped with SYNTEC or other domestically produced CNC systems.
MACHINE SPECIFICATION PARAMETERS
项目ITEM | T5 | T6 | T7 | T8 | |
加工能力 Capacity | 床身上最大的回转直径 Max. swing diaover bed | φ320mm | φ450mm | φ550mm | φ450mm |
刀座板上面最大的回转直径 Swing over cross slide | φ160mm | φ250mm | φ380mm | φ250mm | |
最大的车削直径 Max. turning diameter | φ250mm | φ260mm | φ450mm | φ260mm | |
最大的车削长度 Max. turning length | 300mm | 420mm | 560mm | 420mm | |
主轴 Spindle | 液压卡盘尺寸 Hydraulic chuck dimensions | 6寸 | 6寸 | 8寸 | 8寸 |
主轴头型式(ISO) Spindle nose | A2-5 | A2-5 | A2-6 | A2-6 | |
主轴最高转速 Max. spindle speed | 5500r/min | 5000r/min | 标配4500rpm 大孔径4000rpm | 5000r/min | |
主轴通孔直径 Spindle bore dia | φ57mm | φ60mm | 标配φ62mm 大孔径φ76mm | φ62mm | |
主轴可通过棒料直径 Through hole diameter | 筒夹(Collet chuck):φ42mm 卡盘（Chuck）：φ45mm | 卡盘(Chuck): φ45mm | 标配φ51m 大孔径φ62mm | 卡盘(Chuck):φ51mm | |
主电机 Main motor | 5.5KW/7.5KW | 7.5/11KW | 15/18.5KW | 11/15KW | |
刀架 Turret | 驱动形式 Driving fom | 液压/伺服刀架 Hydraulic/Servo turret | 伺服刀架 Servo turret | 伺服刀架 Servo turret | 伺服刀架 Servo turret |
刀位数 Number of stations | 8 | 12 | 12 | 12 | |
刀具尺寸(车刀/镗孔刀) Tool size | 20×20/φ25mm | 20×20/φ32mm | 25×25/φ40mm | 20×20/φ32mm | |
尾座 Tailstock | 套筒直径 Tailstock dia | φ70mm | φ75mm | φ90mm | φ75mm |
顶尖锥度 Center taper | MT No.4 | MT No.4 | MT No.4 （可选MT No.5） | MT No.4 | |
套筒行程 Tailstock quill travel | 80mm | 80mm | 100mm | 80mm | |
尾座体最大行程 Maximum stroke of tailstock body | 290mm | 430mm | 520mm | 430mm | |
床鞍 Carriage | 倾斜角度 DEG Slant angle | 45° | 30° | 45° | 30° |
移动距离 X/Z X/Z travel | 150/305mm | 150/460mm | 215/600mm | 150/460mm | |
进给电机功率 Feed motor power | 1.2KW/1.2KW | 1.2KW/1.2KW | 1.8KW/1.8KW | 1.8KW/1.8KW | |
快速移动速度X/Z Rapid traverse rare X/Z | 18/18m/min | 20/24m/min | 24/28m/min | 20/24m/min | |
最大进给速度Max.imun feed speed | 8m/min | 8m/min | 8m/min | 8m/min | |
滚珠丝杠直径X/Z Ball screw diameter X/Z | φ28×6/φ32×8mm | φ32×10/φ32×12mm | φ32×10/φ40×12mm | φ32×10/φ40×12mm | |
冷却 Cooling | 电机功率 Power | 180W | 550W | 550W | 550W |
冷却箱容积 Cooling tank volume | 60L | 150L | 150L | 150L | |
其它 Others | 电源容量 Required electric Power | 12KVA | 15KVA | 25KVA | 21KVA |
机床尺寸(长×宽×高) Floor Space | 2040×1482×1754mm | 2820×1580×1700mm | 3190×1760×1960mm | 2820×1580×1700mm | |
机床重量 Mass of machine | 约 3200kg about 3200kg | 约3600kg about 3600kg | 约4500kg about 4500kg | 约3800kg about 3800kg | |
