T7Y
TURNING AND MILLING CENTER
Spindle:Large Through-Hole,High Precision, High Speed,High Stability
This machine adopts the form of a mechanical spindle.After precise dynamic balance correction,it has good rotational accuracy and stability,and strong vibration resistance.The spindleadopts high-speedangular contact ball bearing and cylindrical roller bearing structure,which has good rigidity and a speed of up to 4500r/min.
Machine Host:High Rigidity,High Anti Vibration Structure
T7Y CNC lathe adopts an integral 30°inclined bed structure,and adopts high-quality cast iron for multiple aging times to ensure the anti-deformation and anti-vibration ability of the basic parts;The large span design of the Z-axis guide rail improves the anti-deflection ability of the saddle;The integrated design of the saddle and theslide plate with the screw nut seat reduces the connection links and further enhances the force and vibration resistance of the displaced parts.This series of targeted design makes the machine have good vibration resistance,accuracy and long-term stability that far exceed the same level of models on the market.
Tools:Quick Tool Change,Precise Positioning
T7Y miling center adopts an orthogonal Y-axis (hard rail)withatwelve station power turret, servo indexing,tooth disc positioning,fast tool changing speed,accurate positioning,and meets the processing needs of most parts mlling and drilling in the market.
Feed:Accurate Positioning And High-Precision Feeding
The X-axis and Z-axis guide rails are made of high-precision linear roller-shaped rolling guides,and the Y-axis is in the form of hard rails,which has good vibration resistance and strong bearing capacity.The three-axis feed shaft adopts high-rigidity ball screws,which provide extremely high screw rigidity while ensuringthe feed accuracy.
MACHINE SPECIFICATION PARAMETERS
项目ITEM | T7Y标配新代（选配发那科） Standard SYNTEC (Optional FANUC) | |
加工能力 Capacity | 床身上最大的回转直径 Max. swing diaover bed | φ650mm |
过床鞍最大回转直径 Swing over cross slide | φ350mm | |
最大的车削直径 Max. turning diameter | φ350mm | |
最大的车削长度 Max. turning length | 550mm | |
主轴 Spindle | 液压卡盘尺寸 Hydraulic chuck dimensions | 8寸 |
主轴头型式(ISO) Spindle nose | A2-6 | |
主轴转速 Spindle speed | 45-4500r/min | |
主轴通孔直径 Spindle borediameter | φ62mm | |
主轴可通过棒料直径Through hole diameter | 卡盘（Chuck）：φ51mm | |
主电机功率(连续/30分钟) Spindlemotor (Continuous/30 minutes) | 11KW/15kw | |
刀架 Turret | 驱动形式 Driving fom | 伺服动力刀塔 Servo powered turret |
刀位数 Number of stations | 12 | |
刀具尺寸(车削/镗孔) Tool size (Turning/and boring) | 20×20/φ32mm | |
尾座 Tailstock | 尾座形式 Tailstock form | 液压尾座Hydraulic tailstock |
套筒直径 Tailstock dia | φ90mm | |
顶尖锥度 Center taper | MT No.5 | |
套筒行程 Tailstock quill travel | 100mm | |
尾座体最大行程Maximum stroke of tailstock body | 520mm | |
床鞍 Carriage | 倾斜角度 DEG Slant angle | 30° |
移动距离 X/Y/Z travel | 220/100/600mm | |
进给电机功率X/Y/Z Feed motor power X/Y/Z | 标配2.4/1.1/2.4KW(FANUC1.8/1.8/1.8KW) | |
快速移动速度X/Y/Z Rapid traverse rare X/Y/Z | 20/10/24m/min | |
最大进给速度Max.imun feed speed | 8m/min | |
滚珠丝杠直径X/Y/Z Ball screw diameter X/Y/Z | φ32×10/φ32×10/φ40×12mm | |
冷却 Cooling | 电机功率/扬程 Motor Power/lift | 550W/40KW/M |
冷却箱容积 Cooling tank volume | 150L | |
其它 Others | 电源容量Required electric Power | 25KVA |
机床尺寸(长×宽×高)Floor Space | 2750×2020×2100mm | |
机床重量 Mass of machine | 约 5000kg about 5000kg | |
