T20
Series Precision Swiss Type Lathe
★T20 series precision swiss type lathe with highprecision high speed machine tool performance, side-by-side with two shaft and tool configuration control knife rest arrangement structure, the rest partadopts the unique high rigid design which can realize full depth of processing high rigidity. This series of Z axis line of the machine tool can reach 245mm,more long pieces can decrease thetimes of feeding improve processing efficiency. For most of the partswithin245mm length canbefinished in feeding partsprocessing.
★The series of machine tools with high speed precision synchronous guide bushing, the workpiece endface processing function, lateral drlling, tapping, milling slot, eccentric hole processing function of power tool function module, Y axis of super-long stroke can be combinedaccording to th customer needs to customize a variety of flexible toolfunction. Configure automatic feeder, feedingdevice ,continuous processingand high precision. Morevolumecomplex shapeprecision composite processing of shaft parts.
MACHINE SPECIFICATION PARAMETERS
项目ITEM | T20 | |
加工能力 Capacity | 最大夹持棒料 Max spindle hole diameter | φ3-φ20mm |
最大加工长度 Max turning length | 旋转导套：245mm rotation guide bushing 无导套：45mm No guide bushing | |
主轴最大钻孔直径 Max spindle drilling diameter | φ10mm | |
主轴最大攻丝直径 Max spindle tapping diameter | M10 | |
动力头最大钻孔直径 Max power tool drilling diameter | Φ6mm | |
动力头最大攻丝直径 Max power tapping diameter | M5 | |
主轴 Spindle | 最高回转速度 Max spindle speed | 6000r/min |
主轴通孔直径 Spindlebore dia | φ23mm | |
中心高度 Center height | 1000mm | |
主轴功率 Spindle power | 3 KW | |
刀具配置 Tool specs | 刀具数量 Number of tool | 14(17)把 |
车削刀具 Turning tool | 6*φ12x150mm | |
端面钻孔刀具 Facing tool | 4*ER16 | |
侧向动力刀具 Side power tool | 4*ER16 | |
端面动力刀具(选配) Face power tool (optional) | 3*ER16(动力)+4*ER16(端面孔) | |
动力刀具最高转速 Max speed of power tool | 5500rpm | |
动力头电机功率 Motor power of power tool | 0.75Kw | |
行程/进给 Travel/Axes
| 控制轴数 Numberof axis | X、Y、Z 3轴 |
快移速度 Rapid move speed | X轴：15m/min Y轴、Z轴：18m/min | |
电机功率(X、Y、Z) Motor power (X、Y、Z) | 0.75KW | |
其它 Others | 机床尺寸(长×宽×高) Floor Space | 1840*1240*1740mm |
机床重量 Mass of machine | 约 2200kg about 2200kg | |
