JYC30
STATIC PRESSURE ULTRA PRECISION LATHE
★The spindle and feed axis of the machine tool adopt the cutting-edge technology of domestic and international machine tool design and production-constant pressure and static pressure technology,with high motion accuracy and good rigidity.
★Can be used for hard turning of quenched parts, metal cutting roundness up to 0.2μm,used foroptical component processing,turning diameter up to 200mm,surface roughness Ra<0.1.The development of high-precision software for the turningof spherical, aspherical, off-axis and free-form components provides effective support for efficient machining.
Note:
1)For the processing of optical parts and brittle parts,special vacuum adsorptionfixtures are required.
2)The hard turning machine is equipped with static pressure spindle,driven by hard rails and lead screws,forming an economical ultra-precision hard turning,which can adapt to a wider range of working conditions.
MACHINE SPECIFICATION PARAMETERS
项目ITEM | JYC30 | |
加工能力 Capacity | 最大回转直径Max swing diameter | φ240mm |
横向刀架体上回转直径 Rotation diameter on the lateral tool holder body | φ110mm | |
最大加工直径Max. turning diameter | φ200mm | |
最大加工长度Max. turning length | 100mm | |
最高回转速度Max spindle speed | 4000r/min | |
主轴 Spindle | 主轴贯通直径Spindle through diameter | φ30mm |
主轴外圆面径向跳动 Radial runout of the outer circle of the spindle | ≤0.001 mm | |
主轴回转精度Spindle rotation accuracy | ≤0.0005 mm | |
重复定位精度 Repeatability | ≤0.0005 mm | |
主轴弹簧夹头柄径Spindle chuck shank diameter | 中 36 mm | |
快进速度 Fast forward speed | X轴快移速度 X-axis rapid traverse | 20m/min |
Z轴快移速度 Z-axis rapid traverse | 20m/min | |
行程 Travel | X轴移动量X-axis travel | 250mm |
Z轴移动量Z-axis travel | 230mm | |
电机 motor | 主轴电机(内藏式马达)Spindle motor (built-in motor) | AC5.5/7.5kW |
进给电机Feed motor X/Z | 直线电机 Linear motor | |
其它 Others | 总电气容量Required electric power | 6 kVA |
主轴中心高度Spindle center height | 986mm | |
机床尺寸(长×宽×高)Floor Space | 1310*1180*1660mm | |
机床重量Mass of machine | 约 1200kg about 1200kg | |
